WINDOW SCREENS LOUVRE STYLE

SIMPLE TO USE INSTRUCTIONS BELOW – ALL FITTINGS GENERALLY IN STOCK

• Construct your screen on the ground first
• Connect louvre channel to the 50×50 support rails to the side for both sides
• Insert first slat, get it level & Tec double screw it through the rear (screws are free)
• All slats will finish flush to the bottom and top
• All slides into laser cut holes to hold slats VERY tight
• Insert next slat, etc.
• Connect your mounting brackets to the 4 corners on the rear of the screen and Tek
• Insert the 300mm arm tube to each bracket.  if you want it closer to house cut down the arms first
• Lift louvre screen to the house, hold level and mark where the brackets needed to be bolted to your house if brick
• If timber house you may be able to fit brackets to tube and  hold and screw to house in that lift.
• If slat width is wider than 1500 then will be 6 arms to connect to house, 3 on each side.